User manual PHILIPS HQ300

[. . . ] Remove the batteries from the appliance if you are not going to use it for some time. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 3 Press the release button (1) and remove the 4 Clean the inside of the shaving unit and the hair Every two months: shaving heads Do not throw away batteries with the normal household waste, but dispose of them at an official collection point for batteries. [. . . ] You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 3 Press the release button (1) and remove the 4 Clean the inside of the shaving unit and the hair Every two months: shaving heads Do not throw away batteries with the normal household waste, but dispose of them at an official collection point for batteries. Always remove the batteries before you discard and hand in the appliance at an official collection point. Guarantee & service If you need information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. Guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. The central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2) (Fig. Extra thorough cleaning For extra thorough cleaning, put the shaving heads in a degreasing liquid (e. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Replacement Replace the shaving heads every 2 years for optimal shaving results. Replace damaged or worn shaving heads with HQ3 Philips Double Action shaving heads only. 1 Press the switch lock and push the on/off slide The central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2) (Fig. 2 Move the shaving heads over your skin. [. . . ] 1 Press the switch lock and push the on/off slide The central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2) (Fig. 2 Move the shaving heads over your skin. [. . . ]