User manual PHILIPS HQ33

[. . . ] Every two months: shaving heads 1 Switch the shaver off. 2 Press the release button (1) and remove the shaving unit (2) (fig. 3 Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (fig. [. . . ] B The shaver has not been cleaned well enough or has not been cleaned for a long time. Clean the shaver thoroughly before you continue shaving. Clean the cutters and guards with the brush supplied. Inserting batteries The appliance runs on two R6 AA 1. Make sure that your hands are dry when inserting the batteries. To avoid damage due to battery leakage: do not expose the appliance to temperatures higher than 35cC. Remove the batteries if the appliance is not going to be used for a month or more; do not leave empty batteries in the appliance. 2 Move the shaving heads quickly over your skin, making both straight and circular movements (fig. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips system. 3 Switch the shaver off by pushing the on/off slide downwards. 4 Put the protection cap on the shaver every time you have used it, to prevent damage (fig. For easy and optimal cleaning, the Philips Action Clean (shaving head cleaner, type HQ100) is available. Contact the Customer Care Centre in your country about the availability of this accessory. 2 The shaver does not work when the on/off slide is pushed upwards. Replace the shaving heads every two years for optimal shaving results. [. . . ] Always remove the batteries before discarding the appliance or handing it in at an official collection point. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch the shaver off. 2 Clean the top of the appliance first, using the brush supplied (fig. [. . . ]