User manual PHILIPS HQ4/1

[. . . ] By doing this, you help to preserve the environment (Fig. The built-in rechargeable shaver battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the shaver at an official collection point. Dispose of the battery at an official collection point for batteries. [. . . ] Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the shaver to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way. Disposal of the battery 3 Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. 12). Only remove the battery if it is completely empty. Electromagnetic fields (EMF) 4 Slide the shaving heads out of the retaining frame and clean them one by one (Fig. Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored. Brush carefully in the direction of the arrow. 1 Remove the shaver from the wall socket. 2 Let the shaver run until it stops, undo the screws and open the shaver (Fig. Clean the shaver thoroughly before you continue shaving. See chapter `Cleaning and maintenance'. Cause 2: long hairs are obstructing the shaving heads. Clean the cutters and guards with the brush supplied. See chapter `Cleaning and maintenance', section `Every two months: shaving heads'. Cause 3: the shaving heads are damaged or worn. See chapter `Charging'. 2 The shaver does not work when the on/off slide is 1 Switch off the shaver or remove it from the wall 2 Press the release button (1) and remove the shaving unit (2) (Fig. 10). making both straight and circular movements (Fig. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 2 Move the shaving heads quickly over your skin, 3 Remove the retaining frame by pushing the sides of 3 Switch off the shaver by pushing the on/off slide downwards. the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. [. . . ] Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 2 Move the shaving heads quickly over your skin, 3 Remove the retaining frame by pushing the sides of 3 Switch off the shaver by pushing the on/off slide downwards. the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. 12). 4 Slide the shaving heads out of the retaining frame (Fig. 18). 4 Put the protection cap on the shaver every time you have used it, to prevent damage (Fig. [. . . ]