User manual PHILIPS HQ4/3

[. . . ] Do not recharge the shaver in a closed pouch. When charging for the first time and after a long period of disuse: leave the shaver to charge for 24 hours. 4 Remove the powerplug from the socket and pull the appliance plug out of the shaver when the battery has been fully charged. [. . . ] 4 Remove the powerplug from the socket and pull the appliance plug out of the shaver when the battery has been fully charged. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philishave system. Replace the shaving heads (type HQ4 Micro Action) every 2 years for optimal shaving results. The trimmer can be activated while the motor is running. For easy and optimal cleaning, the Philishave Action Clean (shaving head cleaner, type HQ100) is available. ask your Philishave dealer for information. Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Do not throw the battery away with the normal household waste, but hand it in at an official collection point. You can also take the battery to a Philips Service Centre, which will dispose of it in an environmentally safe way. Only remove the battery if it is completely empty. 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Let the shaver run until it stops, undo the screws and open the shaver. [. . . ] 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Let the shaver run until it stops, undo the screws and open the shaver. Do not connect the shaver to the mains again after the battery has been removed. [. . . ]