User manual PHILIPS HQ442

[. . . ] Keep page 3 and pages 32 and 33 open when reading these operating instructions. Do not allow the shaver to become wet (fig. [. . . ] The trimmer is not required for long hairs in the neck area; these hairs can easily be shaved off with the shaving unit. ⷠAfter each use: switch off and clean the trimmer using the brush. Every six months: apply two drops of light machine oil to the teeth of the trimmer (fig. Once per week: shaving slots and hair chamber. ) - Use the short bristled brush to clean the shaving head slots (fig. - To remove the shaving unit depress the retaining button (1) and lift the shaving unit from the shaver (2) (fig. - Remove hairs from the chamber and shaving unit using the long bristled brush (fig. Once per 3 months: shaving slots, hair chamber and shaving unit (guards and cutters). (With oily skin or when using pre-shave lotion: once per month) · Then proceed with the directions corresponding to fig. - Release (1) and remove the holder (2) from the shaving unit (fig. - Slide one shaving head (guard and cutter) from the holder (fig. Remove only one shaving head (guard and cutter) at a time for cleaning to ensure that the cutters and guards do not become mixed. [. . . ] As an alternative to using light machine oil for lubrication you may use the specially formulated Philishave cleaner/lubricant type 389 SHC/1 available from authorised Philips dealers and Philips Service Centres. Replacement shaving heads Use only Philishave replacement heads type HQ 4 when replacing worn or damaged shaving heads. [. . . ]