User manual PHILIPS HQ46

[. . . ] 9). 3 Press the release button (1) and remove the shaving unit (2) (Fig. 10). - 4 Clean the inside of the shaving unit and the hair chamber with the brush (Fig. 11). - 5 Put the shaving unit back onto the shaver. Every two months: shaving heads 1 Switch off the shaver or remove it from the wall socket. 2 Press the release button (1) and remove the shaving unit (2) (Fig. 10). Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. [. . . ] 2 Let the shaver run until it stops, undo the screws and open the shaver (Fig. 21). Do not connect the shaver to the mains again after the battery has been removed. Guarantee & service If you need information or if you have a problem, please visit the Philips website at www. philips. com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. 5 Clean the cutter with the short-bristled side of the 6 Brush the guard (Fig. 7 Slide the shaving heads back into the retaining 8 Put the shaving unit back onto the shaver. frame and put the retaining frame back into the shaving unit (Fig. For extra thorough cleaning, clean the shaving heads by putting them in a degreasing liquid (e. g. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads (Fig. Storage Put the protection cap on the shaver to prevent damage (Fig. 7). 1 Push the slide pins out of the appliance with the slide (Fig. , 2 Insert the slide pins into the wall socket (Fig. 3). , As soon as you start to charge the empty shaver, the green pcharging light goes on (Fig. Cordless shaving time 3 Remove the appliance from the wall socket when , , , - 1 Reduced shaving performance Troubleshooting A fully charged shaver has a cordless shaving time of up to 30 minutes. Using the appliance Shaving and pushing the on/off slide upwards (Fig. The switch lock prevents accidental switching on of the appliance. Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ4 Ç Philips shaving heads only. socket. 1 Switch on the shaver on by pressing the switch lock , , - Cause 1: the shaving heads are dirty. The shaver has not been cleaned well enough or has not been cleaned for a long time. Clean the shaver thoroughly before you continue shaving. [. . . ] Cleaning and maintenance Regular cleaning guarantees better shaving performance. , For easy and optimal cleaning, the Philips Action Clean (shaving head cleaner, type HQ100) is available. Ask your Philips dealer for information (Fig. Note:The Philips Action Clean may not be available in all countries. [. . . ]