User manual PHILIPS HQ484

[. . . ] When you charge the shaver for the first time or after a long period of disuse, let it charge continuously for 4 hours. You can also shave without charging, simply connect the shaver to the mains. Do not leave the appliance connected to the mains for more than 24 hours. Charge indications Charging , As soon as you start charging the empty shaver, the green charging light goes on. [. . . ] 2 Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Push the on/off slide downwards to switch off the shaver. 4 Put the protection cap on the shaver every time you have used it, to prevent damage. Trimming You can use the trimmer to trim your sideburns and moustache. 1 Push the slide upwards to open the trimmer. The trimmer can be activated while the motor is running. cleaning and maintenance Regular cleaning guarantees better shaving performance. - For easy and optimal cleaning, the Philips Action Clean (shaving head cleaner, type HQ100) is available. Contact the Customer Care Centre in your country about the availability of this accessory. 2 Press the release button (1) and remove the shaving unit (2). 3 To remove the retaining frame, push the sides of the central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2). 1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 5 Slide the new shaving heads into the retaining frame. Accessories The following accessories are available: - HQ4+ Philips shaving heads. - HQ110 Philips shaving head cleaner (shaving head cleaning spray). Environment - Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. - The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the appliance at an official collection point. [. . . ] 1 Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 2 Let the shaver run until it stops, undo the screws and open the shaver. Do not connect the shaver to the mains again after you have removed the rechargeable battery. Guarantee & service If you need information or if you have a problem, please visit the Philips website at www. [. . . ]