User manual PHILIPS HQ6070

[. . . ] - The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap (Fig. Always check if the water is not too hot, to prevent your hands from getting burnt. This Philips appliance complies with all standards regarding electromagnetic fields (EMF). [. . . ] Make sure that the projections of the shaving heads fit into the recesses. 2 Press the release button (1) and open the shaving unit (2) (Fig. rinsing them under a hot tap for some time (Fig. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 6 HQ6075: Put the shaving heads back into the Electromagnetic fields (EMF) 3 Clean the shaving unit and the hair chamber by 7 HQ6073/HQ6070: Put the shaving heads back into 4 Rinse the outside of the appliance (Fig. 5 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise (your shaving heads may differ from the one shown in the figure). inserting the hinge into the slot in the rim of the hair chamber and pushing it home until it locks into place (`click') (Fig. 15). 8 Put the shaving unit back onto the shaver by 6 Open the shaving unit again and leave it open to let 9 Close the shaving unit. Accessories The following accessories are available: - HQ8500/HQ8000 powerplug - HQ64 Super Lift & Cut Shaving Heads (HQ6073/ HQ6070) - HQ8 Precise Cutting System Shaving Heads (HQ6075) - HQ110 Philips Shaving Head Cleaning Spray (not available in China) Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. The built-in rechargeable shaver battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the shaver at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the shaver to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way. Disposal of the battery Only remove the battery if it is completely empty. 1 Open the shaving unit and pull it off the shaver. You can also leave the shaving unit attached to the shaver. 2 HQ6075: Remove the retaining frame (Fig. [. . . ] Clean the shaving heads thoroughly (see chapter `Cleaning and maintenance'). Long hairs may be obstructing the shaving heads. Clean the cutters and guards properly with the brush supplied (see chapter `Cleaning and maintenance'). [. . . ]