User manual PHILIPS HQ6071

[. . . ] -- The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts. Compliance with standards -- This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. -- This shaver complies with the applicable IEC safety standards. [. . . ] 4 Rinse the outside of the appliance (Fig. 5 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely (Fig. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit. You can also pull the shaving unit off the shaver for easier cleaning. 2 Turn the wheel anticlockwise (1) and remove the retaining frame (2). Then take out the shaving heads (Fig. 3 Clean the cutters and guards with the brush supplied (your shaving heads may differ from the one shown in the figure) (Fig. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 4 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise (Fig. Note: If you removed the shaving unit from the shaver, reattach it. First insert the hinge of the shaving unit into the slot in the rim of the hair chamber and then push the shaving unit home until it locks into place (‘click’). Trimmer Clean the trimmer every time you have used it. 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 2 Clean the trimmer with the brush supplied (Fig. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months (Fig. Storage -- To prevent damage to the shaving unit, put the protection cap on the shaver (‘click’) (Fig. Replacement To maintain optimal shaving results, replace the shaving heads every two years. [. . . ] The shaver does not shave as well as it used to. You may not have cleaned the appliance properly. Clean the shaving heads thoroughly (see chapter ‘Cleaning and maintenance’). Long hairs may be obstructing the shaving heads. [. . . ]