User manual PHILIPS HQ6423

[. . . ] keep the appliance and the mains cord dry. Store and use the appliance at a temperature between 5cC and 35cC. Move the shaving heads quickly over your skin, making both straight and circular movements. [. . . ] Remove and clean the shaving heads (cutters and guards) one by one. do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored. Clean the cutter with the short-bristled side of the brush. Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit (1) and turn the wheel clockwise (2). Put the shaving unit back onto the shaver. For extra thorough cleaning, clean the shaving heads by putting them in a degreasing liquid (e. Heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ55 Philips Super Reflex shaving heads only. Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. [. . . ] B The shaver has not been cleaned well enough or has not been cleaned for a long time. Clean the shaver thoroughly before you continue shaving. Clean the cutters and guards with the brush supplied. [. . . ]