User manual PHILIPS HQ 662

[. . . ] Do not recharge the shaver in a closed pouch. Recharge, store and use the appliance at a temperature between 5cC and 35cC. You cannot use the shaver when it is charging, because the appliance does not work while the battery is being charged. When charging for the first time or after a long period of disuse: leave the shaver to charge continuously for 12 hours. [. . . ] 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replace the shaving heads (type HQ6 Quadra) every 2 years for optimal shaving results. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Remove the shaving heads and place new ones in the shaving unit in such a way that the projections fit exactly into the recesses in the shaving unit. Put the retaining frame back into the shaving unit, press the wheel and turn it clockwise. Heads have been properly C If the shaving shiny parts are pointing inwards inserted, the and towards each other. The following accessories are available: - HQ8000 powerplug. - HQ110 Philishave shaving head cleaner (shaving head cleaning spray). Do not throw the battery away with the normal household waste, but hand it in at an official collection point. You can also take the appliance to a Philips service centre, which will Remove the battery for you and will dispose of it in an environmentally safe way. Only remove the battery if it is completely empty. 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. [. . . ] Remove the old shaving heads from the shaving unit and replace them with new ones. Damaged or worn shaving heads (cutters and guards) may only be replaced with original HQ6 Philishave Quadra shaving heads. Put the retaining frame back into the shaving unit, press the wheel and turn it clockwise. The shaver does not work when the on/off button is pressed. [. . . ]