User manual PHILIPS HQ6867

[. . . ] Do not rinse with water hotter than 80cC. C Charging you start charging the empty shaver, As soon as the red light lights up. When there is sufficient power for 1 shave, the green light starts blinking. As charging continues, more and more lights will become green to indicate to what level the batteries have been charged. [. . . ] This cord is available from your Philishave dealer. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philishave system. Replace the shaving heads (type HQ6 Quadra Action) every 2 years for optimal shaving results. The trimmer can be activated while the motor is running. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit every week with hot water (60cC-80cC). When you clean the appliance, it is not necessary to take the shaving heads (cutters and guards) apart. If you want to take them apart, be sure not to mix up the cutters and guards, since grinding of the cutters in the guards only guarantees optimal performance for each matching set. If you accidentally mix up the sets, it could take several weeks before optimal shaving performance is restored. Every week: shaving unit Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. press the release button and open the shaving unit. Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Leave the shaving unit open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replace the shaving heads every two years for optimal shaving results. 1 Switch the shaver off, remove the powerplug from the socket and pull the appliance plug out of the shaver. Remove the shaving heads and place the new ones in the shaving unit in such a way that the parts with the small holes point towards the centre of the shaving unit. [. . . ] Put the retaining plate back onto the shaving unit. Remove the old shaving heads from the shaving unit and replace them with new ones Damaged or worn shaving heads (cutters and guards) must only be replaced with the original Philishave HQ6 Quadra Action shaving heads. Put the retaining plate back onto the shaving unit. The shaver does not work when the ON/OFF button is pressed If you need information or if you have a problem, please visit the Philips Web site at www. [. . . ]