User manual PHILIPS HQ-6941

[. . . ] Make both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. [. . . ] Every two months: shaving heads 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button (1) and remove the shaving unit (2). 3 Turn the wheel anticlockwise (1) and remove the retaining frame (2). English 9 4 Remove the shaving heads (cutters and guards) one by one and clean them with the cleaning brush supplied. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrow. 7 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, push it down (1) and turn the wheel clockwise (2). 8 Put the shaving unit back onto the shaver. Extra-thorough cleaning For extra-thorough cleaning, put the shaving heads in a degreasing liquid (e. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Trimmer (HQ6946/HQ6940 only) Clean the trimmer every time you have used it. [. . . ] See chapter ‘Cleaning and maintenance’, section ‘Every two months: shaving heads’. Replace the shaving heads every 2 years for optimal shaving results. The shaver does not work when I push the on/off slide upwards. [. . . ]