User manual PHILIPS HQ 7363

[. . . ] Always check if the water is not too hot, to avoid burning your hands. - The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. - Water may leak from the socket at the bottom of the appliance when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. [. . . ] 1 Push the slide downwards to open the trimmer. The trimmer can be activated while the motor is running. Always check if the water is not too hot, to avoid burning your hands. Note:Water may leak from the socket at the bottom of the appliance when you rinse it. Every day: shaving unit and hair chamber 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving unit. 3 Rinse the hair chamber and the inside of the shaving unit under a hot tap for some time. 5 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Press the release button to open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. Trimmer Clean the trimmer every time you have used it. 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ8 Philips shaving heads only. note: Do not mix up the cutters and the guards to guarantee optimal shaving performance. [. . . ] Guarantee & service If you need service or information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. [. . . ]