User manual PHILIPS HQ7615

[. . . ] Make sure the appliance is switched off before you start charging it. When you charge the shaver for the first time or after a long period of disuse, let it charge continuously for 12 hours. Do not leave the appliance connected to the mains for more than 24 hours. You empty C As soon asgreenstart charging theon. [. . . ] Never dry the shaving unit with a towel or tissue as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads Open the shaving unit, turn the wheel anticlockwise (1) and remove the retaining frame (2). Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise (2) (also see chapter 'Replacement'). Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ6 Philips Quadra shaving heads only. Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). Remove the shaving heads and place new ones in the shaving unit in such a way that the parts with the small holes point towards the centre of the shaving unit. Make sure that the projections of the shaving heads fit exactly into the recesses. Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise (2). The following accessories are available: - HQ8000 powerplug. - HQ110 Philips shaving head cleaner (shaving head cleaning spray). [. . . ] b Cause 2: long hairs are obstructing the shaving heads. Clean the cutters and guards with the brush supplied. The shaver does not work when the on/off button is pressed Cause: the batteries are empty. 3 The shaving unit has come off the shaver Cause: the shaving unit has not been placed correctly. [. . . ]