User manual PHILIPS HQ8172

[. . . ] Always check if the water is not too hot, to prevent your hands from getting burnt. This washable shaver is not suitable for shaving in the shower. Leak from the socket at the C Water maythe appliance, when you rinse it. Bottom of This is normal and not dangerous because all electronics are enclosed in a sealed shell inside the shaver. [. . . ] regular cleaning guarantees better shaving performance. If provided, use the washing machine to clean the shaver. The normal way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the shaver. Always check if the water is not too hot, to prevent your hands from getting burnt. Water may leak from the socket at the bottom of the appliance when you rinse it. Every day: shaving unit and hair chamber 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. You clean C Make sure the shavingthe inside as well as the outside of unit. 4 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may Take several weeks before optimal shaving performance is restored. Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. [. . . ] Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. The shaver has not been rinsed long enough or the water used was not hot enough. Clean the shaver thoroughly before you continue shaving. [. . . ]