User manual PHILIPS HQ8870

[. . . ] During the first few charges, the shaving time indicated is a conservative estimate, which will be adjusted automatically to the actual shaving time once the shaver has determined your shaving behaviour. That the shaver is to be C To remind you will be about oncedueweek in cleaned, which a case of normal use, the tap symbol with blinking water drops appears on the display. Shaver C When you switch thelow, theoff while the batteries are running plug symbol starts blinking and you will hear a few beeps. When you switch the shaver on or off, the display lights up for approx. [. . . ] Personal Comfort C The to adapt the shaverControl system allows you to your skin type. - You can set the shaver to 'Normal' for a fast and comfortable close shave. - You can set the shaver to 'Sensitive' for a comfortable close shave with optimal skin comfort. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philishave system. 3 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. The trimmer can be activated while the motor is running. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the appliance. Always check if the water is not too hot to prevent your hands from getting burnt. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). Remove the shaving heads and place new ones in the shaving unit in such a way that the parts with the small holes point towards the centre of the shaving unit. Make sure that the projections of the shaving heads fit exactly into the recesses. 5 Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise (2). The following accessories are available: - HQ8000 powerplug. - HQ110 Philishave shaving head cleaner (shaving head cleaning spray). Do not throw the batteries away with the normal household waste, but hand them in at an official collection point. You can also take the appliance to a Philips service centre, which will remove the batteries for you and will dispose of them in an environmentally safe way. Only remove the batteries if they are completely empty. 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. [. . . ] Clean the cutters and guards with the brush supplied. The shaver does not work when the on/off button is pressed Put the powerplug in the wall socket. Cause: water stays behind on the metal parts of the appliance after cleaning. To prevent scale deposits on the metal parts of the appliance, wipe the shaver dry with a towel or tissue after rinsing. [. . . ]