User manual PHILIPS HQ 888

[. . . ] Warning - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Children should be supervised to ensure that they do not play with the appliance. caution - Use and store the appliance at a temperature between 5°C and 35°C. [. . . ] 2 Brush the outside of the shaving unit with the brush supplied (Fig. 4 Brush the inside of the shaving unit (Fig. Every two months: shaving heads Note: Do not use cleaning agents or alcohol to clean the shaving heads. 4 Remove the shaving heads from the shaving unit one by one (Fig. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 5 Remove the cutter from the guard (Fig. 9 Put the retaining frame back into the shaving unit and turn the wheel clockwise. 10 Put the shaving unit back onto the shaver. Tip: For optimal shaving performance, we advise you to lubricate the shaving heads with a drop of sewing machine oil every six months. Storage - Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. Replacement Replace the shaving heads every two years for optimal shaving results. 4 Remove the shaving heads from the shaving unit and replace them with new ones (Fig. 5 Put the retaining frame back into the shaving unit and turn the wheel clockwise. [. . . ] Clean the shaving heads thoroughly (see chapter `Cleaning and maintenance'). long hairs may be obstructing the shaving heads. Clean the cutters and guards properly with the brush supplied (see chapter `Cleaning and maintenance'). [. . . ]