User manual PHILIPS HQ8890

[. . . ] You connect the appliance to the C As soon asdisplay lights up, the plug symbol mains, the appears and the minute indication starts blinking. As C As soon thethe batteries have been fully charged, word 'FULL' runs across the display and the display light starts blinking. Segments indicate how much energy there is still left in the batteries. The shaving time of a fully charged shaver can range from 55 to 70 minutes, depending on your type of beard and your shaving behaviour, and is calculated by the built-in computer. [. . . ] You can also clean the shaver in the following way: Every day: shaving unit and hair chamber 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 5 Rinse the outside of the appliance. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads Open the shaving unit, turn the wheel anticlockwise (1) and remove the retaining frame (2). Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise (2). Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replace the shaving heads every two years for optimal shaving results. [. . . ] Never wipe the shaving unit with a towel or a tissue, as this could damage the shaving heads. If the scale proves to be persistent, it can easily be removed by using some descaler. Rub some descaler onto the metal parts, leave it to do its work and wipe the metal parts dry. 4 The shaving unit has come off the shaver. [. . . ]