User manual PHILIPS HQ8894

[. . . ] Offers the unique C This appliancechoose you display layout you possibility to the prefer. You can choose between two layouts: a number layout or a stacked block layout. The cleaning, plug and shaving unit symbols appear, together with the display layout you are currently using. You can switch between the two display layouts by briefly pressing the on/off button. [. . . ] - You can set the shaver to 'Normal' for a fast and comfortable close shave. - You can set the shaver to 'Sensitive' for a comfortable close shave with optimal skin comfort. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philishave system. 3 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. The trimmer can be activated while the motor is running. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the appliance. Always check if the water is not too hot to prevent your hands from getting burnt. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every day: shaving unit and hair chamber 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 5 Rinse the outside of the appliance. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads Open the shaving unit, turn the wheel anticlockwise (1) and remove the retaining frame (2). Clean the cutters and guards with the brush supplied. [. . . ] If the scale proves to be persistent, it can easily be removed by using some descaler. Rub some descaler onto the metal parts, leave it to do its work and wipe the metal parts dry. The shaving unit has come off the shaver. Cause: the shaving unit has not been placed correctly. [. . . ]