User manual PHILIPS HQ9080

[. . . ] - Always unplug the shaver before cleaning it under the tap. - The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. Always check if the water is not too hot, to prevent your hands from getting burnt. If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. [. . . ] Every day: shaving unit and hair chamber 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button (1) and open the shaving unit (2). 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit, pull it off the shaver and remove the retaining frame. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit. Make sure that the projections of the shaving heads fit into the recesses. 4 Put the shaving unit back onto the shaver and close it. Trimmer Clean the trimmer every time you have used it. 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Clean the trimmer with the brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ9 Philips SmartTouch shaving heads only. 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. [. . . ] Guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. The shaver has not been rinsed long enough or the water used was not hot enough. Clean the shaver thoroughly before you continue shaving. Clean the cutters and guards with the brush supplied. [. . . ]