User manual PHILIPS HQ9090

[. . . ] - The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. Always check if the water is not too hot, to prevent your hands from getting burnt. EnglisH Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. The display Charging , When you connect the appliance to the mains to charge it, the power symbol lights up. [. . . ] Every day: shaving unit and hair chamber 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. EnglisH 2 Press the release button (1) and open the shaving unit (2). 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 Rinse the outside of the appliance. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit, pull it off the shaver and remove the retaining frame. 10 EnglisH 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit. Make sure that the projections of the shaving heads fit into the recesses. 4 Put the shaving unit back onto the shaver and close it. Trimmer Clean the trimmer every time you have used it. 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Clean the trimmer with the brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. EnglisH 11 storage 1 Put the protection cap on the shaver to prevent damage. 2 Store the appliance in the luxury pouch or place the appliance in the stand. Travel lock If you are going to store the shaver for a longer period or if you are going to travel, it is possible to lock the shaver. The travel lock prevents the shaver from being switched on by accident. Activating the travel lock 1 Press the on/off button for 3 seconds. , The motor is switched off and the key symbol rotates once. Deactivating the travel lock 1 Press the on/off button for 3 seconds. , The key symbol lights up and flashes a few times. [. . . ] - Cause 2: long hairs are obstructing the shaving heads. Clean the cutters and guards with the brush supplied. See chapter `Cleaning and maintenance', section `Every six months: shaving heads'. - Cause 3: the shaving heads are damaged or worn. [. . . ]