User manual PHILIPS HQC488

[. . . ] Please read these instructions carefully before using the appliance. ⷠBefore connecting the appliance, check if the voltage rating on the mains plug corresponds to the mains voltage in your home. [. . . ] 1) A Standard comb attachment (adjustable to hair lengths of 4 to 21 mm, removable) B Telescopic comb attachment (adjustable to hair lengths of 24 to 40 mm, removable) C Cutting unit (removable) D Cutting length control (press and slide) E On/off switch F Pilot light "Charging" G Appliance plug (low-voltage DC) H Mains plug (with built-in transformer) I Cleaning brush J Styling comb K Socket for appliance plug (low-voltage DC) Charging for cordless use · Charge (and use) the hair clipper at temperatures between +15 °C and +35 °C (+60 °F and +95 °F respectively). ⷠType HQ-C488 comes in two versions: with NiMH batteries and with NiCd batteries. 16 hours (NiMH version) or 8 hours (NiCd version). To guarantee the longest possible working life of the batteries do not charge for more than 24 hours. ⷠIt is advisable not to use the appliance on mains power when the batteries are fully charged. ⷠIf you notice a drop in power during cordless use, simply plug the appliance in and use it directly from the mains. (Also refer to section "Tips". - Insert the mains plug into the wall socket (fig. The pilot light "Charging" will come on to indicate that the batteries are being charged. If the appliance has not been used for a considerable time, recharge it completely before use. When the batteries are empty: corded use - Switch off (fig. - Connect the hair clipper to a wall socket (fig. (If the batteries are completely empty: wait for about one minute. 5) and use the hair clipper directly from the mains. [. . . ] Especially note which comb attachment(s) and which cutting length setting(s) are advised for each specific haircut. ⷠEnsure that your hair clipper is clean and charged. [. . . ]