User manual PHILIPS HQT302

[. . . ] Please read these instructions carefully in conjunction with the illustrations, before using the appliance. â· Take care when using the trimmer for the first couple of times. [. . . ] - Release the batteries holder by pulling the batteries holder at the grip area untill it stops (fig. - Push the batteries holder back into the appliance until it stops (`Click'!To remove empty batteries: - Release the batteries holder by pulling the batteries holder at the grip area untill it stops (fig. Do not leave empty batteries in the appliance. If you do not intend to use the appliance for a considerable time, remove the batteries. How to use the trimmer Before trimming, always comb your beard and/or moustache, using a fine comb. â· Beard trimming: with comb attachment If you have the HQ T301: - Initially use the position for maximum beard length: set the adjustable comb to position 4 by pushing the comb (fig. - For most effective cutting, move the trimmer against the direction of beard growth (fig. If you have the HQ T302: - Initially use the position for maximum beard length: set the adjustable comb to position 9, by turning the zoom ring (fig. - For most effective cutting, move the trimmer against the direction of beard growth (fig. Cutting the unique `Stubble look' Your trimmer is equipped with a unique comb that has a small slot between the two rows of teeth (see fig. It enables you to cut the hairs of the beard to a length of only 1. To obtain the shortest look, the trimmer can be used without the comb in order to reach a stubble length of 0. Cutting single hairs, trimming and shaping of full beards: without comb attachment - Pull the comb attachment from the appliance (fig. [. . . ] Replace the cutting unit as follows: - Remove the old cutting unit by pulling it backwards (fig. - Place the two notches of the new cutting unit into the guide slots (fig. [. . . ]