User manual PHILIPS HQT502

[. . . ] 3 ENGLISH 4 HQT502 4 ENGLISH Important Make sure that the appliance does not get wet. [. . . ] The setting will appear in the window in the centre of the comb attachment. 1 ENGLISH B 7 If you are trimming for the first time, start by using the maximum trimming length setting: setting 4. To trim in the most effective way, move the trimmer against the direction of hair growth. Make sure the flat surface of the comb always stays in contact with the skin. If a lot of hair has accumulated in the comb, remove the comb attachment by adjusting it to setting 4 and then pulling it off the appliance. 2 C C 3 4 8 ENGLISH C 4 5 Blow and/or shake the hair out of the comb. Readjust the comb to the seleted setting. Trimming length setting table setting 1 2 3 4 resulting beard length 1. 5 mm 3. 0 mm 5. 0 mm 7. 0 mm Using setting 1 will result in a unique 'stubble look'. ENGLISH 9 Trimming without comb attachment Full beards and single hairs C 1 Remove the comb attachment by adjusting it to setting 4 and then pulling it off the appliance. Never pull at the flexible top of the comb attachment. Make well-controlled movements. Touch the hair lightly with the trimmer. C 3 10 ENGLISH Cleaning Do not use abrasives, scourers or liquids such as alcohol, petrol or acetone to clean the appliance. 1 2 Make sure the appliance is switched off. Open the cutting unit by pushing it backwards (1). [. . . ] If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. 4203 000 49021 [. . . ]