User manual PHILIPS HR 1377

[. . . ] A spatula) to push ingredients down the feeding tube while the appliance is running. Do not touch the blades of the blender bar, especially when the appliance is plugged in. If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades. Be very careful when you handle or clean the blade unit or the combination disc. [. . . ] - When you use the turbo speed button, the appliance operates at maximum speed. In this case, you cannot adjust the speed with the speed selector. 5 Blend the ingredients by moving the appliance slowly up and down and in circles (Fig. Food processor Blade unit The blade unit is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled eggs, garlic, herbs, dry bread etc. Be very careful when you handle the blade unit, especially when you remove it from the bowl, when you empty the bowl and during cleaning. Chopping quantities, processing times and speed settings Ingredients Parsley Onions & eggs Meat Parmesan Nuts Dark chocolate Quantity 100g 500g 300g 300g 500g 200g Time 30sec. Turn the lid anticlockwise (2) to fix it (`click') (Fig. Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and loosen the ingredients with a spatula or add some liquid. Note: Always let the appliance cool down after chopping meat with the blade unit. 9 After processing, release the normal or the turbo speed button to switch off the appliance and wait until the blade unit has stopped rotating. 10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it (2). Use the normal speed button or the turbo speed button. If you use the turbo speed button, use it briefly to prevent the food from becoming too finely chopped. Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise these ingredients become too hot, start to melt and turn lumpy. Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and ice cubes, as this may cause the blade to get blunt. You can switch from slicing to shredding and the other way round by simply turning the disc. Never process hard ingredients like ice cubes with the disc. 2 Place the combination disc on the tool holder with the slicing or shredding side facing up, depending on the result you want. Turn the lid anticlockwise (2) to fix it (`click') (Fig. Pre-cut large ingredients into chunks that fit in the feeding tube. fill the feeding tube evenly for the best results. [. . . ] Please contact your Philips dealer or an authorised Philips service centre if the overheat protection is activated too often This is not unusual. If the appliance continues to give off this smell after a few times, check the quantities you are processing and the processing time. The motor unit gives off an unpleasant smell the first few times the appliance is used. The appliance makes a lot Stop using the appliance and unplug it. [. . . ]