User manual PHILIPS HR1704

[. . . ] blender · Do not fill the blender jar with ingredients that are hotter than 80 °C. ⷠTo avoid spillage, do not fill the jar above the maximum level indication (i. When you are blending liquid, do not fill the jar higher than 0. Never remove the jar while the blender is operating. [. . . ] ) - Place the jar on to the motor housing and turn in the direction of the arrow until locked (fig. - After putting the ingredients into the jar, place the lid onto the jar and turn in the direction of the arrow until locked (fig. The lid has two positions: one when preparing recipes with filter accessory (`sieve position', fig. 5a) and one to prepare recipes without the filter accessory (`closed position', fig. Oil for the preparation of mayonnaise) can be poured through the small aperture in the lid whilst the motor is running (fig. Dry ingredients, however, should not be processed longer than 1 minute. ⷠCut meat or other solid food into smaller pieces before putting them into the blender jar. ⷠFor best blending with solid ingredients feed a series of small portions into the jar rather than putting one large quantity into it. ⷠIf the blending is not performed quickly, switch off the appliance and - switch the appliance on and off a few times, or - stir the ingredients with a spatula (after you have switched off the motor), or - reduce the contents of the jar. ⷠFor crushed ice drop the ice cubes into the jar whilst the motor is running. Keep the lid on the jar during processing. ⷠFor tomato juice cut the tomatoes up quarters and one by one drop the pieces into the jar whilst the motor is running. Keep the lid on the jar during processing. Do not fill the beaker beyond the "MAX" indication. - Pick up the blade unit by the safety ring (fig. Take care that all grooves fit the ribs inside the beaker. Press and turn clockwise until the blade unit is properly fixed (fig. - Turn the assembled mill upside down and screw it onto the motor unit (fig. - After processing, unscrew the mill from the motor housing by turning it anticlockwise. - Pull the safety ring out and turn it anticlockwise. [. . . ] ⷠThe motor unit can be cleaned with a moist cloth. do not use abrasives , scourers , alcohol etc. Blender - Assemble the blender jar and pour lukewarm water and some washing-up liquid into the blender jar. - Let the appliance run for a few moments. [. . . ]