User manual PHILIPS HR1734

[. . . ] ⷠIf the mains cord of this appliance is damaged, it may only be replaced by a cord of the original type. Turn to your Philips dealer or the Philips organisation in your country for replacement. blender · Do not fill the blender jar with ingredients that are hotter than 80 °C. ⷠTo avoid spillage, do not fill the jar above the maximum level indication (i. [. . . ] - Mount the blender jar onto the blade unit and turn it in the direction of the arrow until it is fixed (fig. - Mount the jar with blade unit onto the motor unit and turn in the direction of the arrow until it is fixed (fig. - After putting the ingredients in the jar, fix the lid onto the jar by pressing it down (fig. - Insert the stopper into the opening in the lid (fig. Speed selection - Make sure that the appliance is plugged in and the blender jar has been properly attached before you switch the appliance on. - Select the speed that is most suitable for the ingredients you want to process (fig. If you are not sure which speed to select, you can always use the highest speed (speed 3). ⷠTo let the appliance run for only a few moments at a time, press the M button and release it straightaway (fig. Put the stopper upside down in the lid to use it as a dosing device (fig. The opening in the lid can be used for adding ingredients while the motor is running (fig. Do not let the appliance run for longer than 3 minutes at a time. If you have not finished processing after 3 minutes, switch the appliance off for one minute before you let it run again. ⷠPrecut meat and other solid ingredients into smaller pieces before putting them into the blender jar. ⷠFor optimal blending of solid ingredients, feed a series of small amounts into the jar rather than processing a large quantity at once. ⷠIf you are not satisfied with the performance of the appliance, switch it off and - let it run briefly a number of times by means of pulse position M, or - stir the ingredients with a spatula (not while the blender is running!To crush ice cubes, drop them onto the blades through the opening in the lid while the motor is running. ⷠIf you are processing solid and liquid ingredients at the same time, first put the liquid ingredients in the jar. Do not fill the beaker beyond the "MAX" indication. If this requires some effort, moisten the rubber ring with a drop of water. - Turn the assembled mill upside down and screw it onto the motor unit (fig. : Ingredients Quantities - peppercorns 25-75 g - sesame seeds 25-75 g - rice, wheat 25-75 g - soy beans 25-75 g - dried peas 25-75 g - coconut flesh 25-75 g - coffee beans 25-75 g - cheese 25-75 g - breadcrumbs one dried slice of bread - sugar cubes 50 g - nuts (shelled) 25-75 g (Optimal results are achieved if you process the quantities mentioned) Storage and sprinkling facilities After you have processed the ingredients, you can unscrew the mill from the appliance. If you remove the blade unit and replace it with the lid (fig. [. . . ] - The motor unit can be cleaned with a moist cloth. do not use abrasives , scourers , alcohol etc. Blender - Quick cleaning: assemble the blender jar and pour lukewarm water and some washing-up liquid into the blender jar. - Let the appliance run for a few moments by pressing the Quick Clean button (fig. [. . . ]