User manual PHILIPS HR1780

[. . . ] Do not exceed the quantities and preparation times indicated in the table. Do not exceed the maximum level indicated on the accessories. Assemble the appliance properly before putting the plug in the wall socket. Keep the appliance out of the reach of children. [. . . ] Never switch the appliance on or off by turning the jar. If you are not satisfied with the result when blending solid ingredients, switch the blender off and let it run briefly a number of times by pressing the Pulse button (P). When the Pulse button is pressed, the motor runs at maximum speed. You can also use the Pulse function when the blender is already switched on. If you press the Pulse button when blending at, for example, the C function, the appliance will start running at the highest speed. As soon as you release the Pulse button, the appliance will automatically continue running at the speed belonging to the C function. The ice will be finely chopped in a few seconds. Empty the jar before processing another batch of ice cubes. When processing light or heavy ingredients you can make use of the timer (H). When the timer button is pressed in, the timer pilot light goes on and the appliance starts running. It will gradually increase its speed until it reaches maximum speed. 35 seconds after the timer button was pressed, the motor automatically stops and the pilot light goes out. You can also use the timer in combination with a particular setting. For instance, if you press the C button after the timer has been running for 10 seconds, the appliance will run at the C setting for the remaining 25 (35-10 = 25) seconds and then switch off automatically. If you press the Pulse button while the timer is being used, the timer pilot light will go out after 35 seconds but the appliance will continue running. The appliance will only stop running when you release the Pulse button. Once the timer function is running additional touches will not increase the time When the appliance is running at a speed belonging to a particular, it will immediately switch to a different speed when the different button is pressed. The appliance will stop running as soon as the OFF button is pressed. To avoid spillage, never fill the jar above the maximum level indication (1litre), particularly not when you are blending hot liquids (maximum 0. While the blender is running, you can unscrew the stopper, remove it from the lid and pour liquid ingredients into the blender jar. Do not let the blender run for more than 3 minutes at a time. If you have not finished blending after 3 minutes, switch the appliance off for one minute before you continue blending. [. . . ] If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. ~ - 50 g Gouda cheese - 250 g cooked broccoli - 2 cooked potatoes - 2 stock cubes (chicken or vegetable) - a dash of cream - a pinch of curry - salt - pepper - nutmeg First cook the broccoli and retain 3/4 l of the water in which the broccoli has been cooked. Put the cooked broccoli with a little of the cooking water and the potatoes in the blender jar and process at maximum speed (setting C). put the broccoli puree and the stock cubes in the rest of the cooking water and bring to the boil. [. . . ]