User manual PHILIPS HR1843

[. . . ] Your guarantee will become invalid if you use other parts or accessories. â· Do not clean the appliance, nor its accessories in the dishwasher. â· Never use the appliance if the mains cord, the plug or any other part is damaged. â· If the mains cord of this appliance is damaged, it must only be replaced by Philips or their service representative, as special tools and/or parts are required. [. . . ] - Put the pulp container (Q) on the motor unit and turn it to the left until it is firmly fixed (fig. - Put the lid (O) in place and finally fasten the clamp (R) by pushing it down (fig 11 a, b, c, d). To disassemble the juice extractor, follow these steps in reverse order and opposite direction. So first unfasten the clamp, then remove the lid and the sieve and finally the white pulp container. How to use the juice extractor - Wash the fruits and/or vegetables and cut them into pieces that fit into the feeding tube. We advise you to select speed 1 for most types of fruit. However, select speed 2 for beetroots and coconut flesh (very hard). - Put the pieces in the feeding tube and push them down gently with the pusher (fig. Don't exert too much pressure on the pusher, since this would affect the quality of the end result and it could even cause the sieve to come to a halt. If no more juice comes out of the appliance: - Switch the appliance off (position O) and wait until the sieve has completely stopped rotating. If it is exposed to air for some time, the juice will lose its nutritional value and its taste. If you want to preserve the juice, put it in a well-sealed jug or jar and put it in the refrigerator. - To obtain even the last drops of juice, put the juice cup back in the juice extractor and switch it on again. If the pulp container is full: - Switch the appliance off (position O) and wait until the sieve has completely stopped rotating. - Detach the pulp container from the motor unit by turning it to the right and remove it (fig. If the juice cup is full: - Switch the appliance off (position O) and wait until the sieve has completely stopped rotating. Always use fresh fruits and vegetables; they contain more juice. â· Very suitable for juice extraction are pineapples, beetroots, apples, cucumbers, carrots, spinach, melons, tomatoes, oranges and grapes. Use the blender to process these fruits. Those of oranges, pineapples or uncooked beetroots) need to be removed. If you want to extract the juice of oranges, lemons, tangerines or grapefruits, peel the fruits first and remove the white skin underneath before you start processing, as this skin has a bitter taste. â· Apple juice turns brown very quickly. [. . . ] crunch the ice at the highest setting and add the fruit juice. You will have a delicious, ice-cold fresh fruit shake that will quench your thirst! M Vegetable shake Ingredients for one large serving: 200 ml carrot juice 1 /2 stalk of celery, cut into pieces 1 medium-sized tomato, peeled and cut into pieces 1 /2 small green or red pepper, cut into pieces small handful of fresh spinach or several sprigs of parsley 2 or 3 ice cubes 1 long, thin stalk of celery for garnishing Preparation: Process 6 to 8 carrots in the juice extractor. Put the carrot juice, the vegetables and the spinach or the parsley in the blender and mix for 15-30 seconds at maximum speed. [. . . ]