User manual PHILIPS HR 2181

[. . . ] Introduction If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. This appliance is intended for household use only. If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to the instructions in the user manual, the guarantee becomes invalid and Philips refuses any liability for damage caused. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] It is recommended to use the AUTO position for small amounts to avoid splashing. blender The blender is intended for pureeing and blending. With the blender you can prepare soups, sauces, milk shakes and batters. You can also use the blender to process vegetables and fruits. Preparing the blender for use 1 Place the blender jar on the motor unit (Fig. Cleaning Always clean the removable parts immediately after use. 2 Disassemble all removable parts before you clean them. 8) 3 Clean all removable parts in the dishwasher or in warm water with some washing-up liquid. All parts except the motor unit are dishwasher-proof. 4 Clean the motor unit with a moist cloth. Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Quick-cleaning the blender jar 1 Pour lukewarm water (500ml-700ml) and some washing-up liquid into the blender jar. 7 Remove the blender jar from the motor unit, take off the lid and rinse the blender jar with clean water. You can only place the blender jar on the motor unit when the handle points to the right. 3 Insert the measuring cup into the opening in the lid (Fig. Do not let the appliance run for more than 3 minutes at a time. If you have not finished processing after 3 minutes, switch off the appliance. Let the appliance cool down for one minute before you let the appliance run again. 5 Before you open the lid, set the speed selector to 0 to switch off the appliance. after using the blender 1 Unplug the appliance. 2 Remove the lid with the measuring cup from the blender jar. 3 Remove the blender jar from the motor unit. [. . . ] Frequently asked questions Question What is the AUTO setting of the speed selector for?Can I pour boiling hot liquids into the blender jar?Why does the motor produce an unpleasant smell during processing?Answer When the speed selector is set to AUTO, the blender automatically speeds up to the maximum speed within 15 seconds and then keeps running at the maximum speed. [. . . ]