User manual PHILIPS HR2387

[. . . ] Keep page 3 and pages 42 open when reading these operating instructions. Please read the instructions and look at the illustrations before you use the appliance. [. . . ] Only for type HR 2389: - If the BAT indication appears on the display briefly when you switch on the appliance, the battery is low but still has a reserve capacity. Keep the old battery separate from normal household waste and dispose of it 4 It is not advisable to use a rechargeable battery in this appliance. Weighing and using the "Reset" function 3 Only for type HR 2387: The scales indicate weight with a division of 2 grams (d = 2 g). - Press button I to switch the scales on (fig. 5) - After 3 seconds the appliance is ready for use (fig. - After 1-2 seconds the appliance is ready for use (fig 6). The display will now show the weight of the bowl with a minus sign (-) in front (fig. - The appliance will automatically subtract the weight of the bowl from each ingredient that is put in the bowl (fig. The appliance will keep on doing so, until you set the display back to 0 by pressing button 3 while the weighing plate is empty (fig. 174 g), you can save yourself some calculating by first pressing button 3 before adding a new ingredient. This will set the display back to 0 again (fig. 13) and the display will then show how much of the new ingredient you are adding (fig. Please note: If the weighing plate has been overloaded (HR 2387: more than 3 kilograms; HR 2388 and HR 2389: more than 5 kilograms), STOP will become visible on the display (fig. Switching off - Press button I to switch the scales off (fig. [. . . ] Storage Make sure that there is nothing on the weighing plate when the appliance is not in use. Only for type HR 2387: The scales can be hung from the wall by means of the suspension eye coming with the appliance. [. . . ]