User manual PHILIPS HR2835

[. . . ] Keep pages 3 and 50 open when reading these operating instructions. Read the instructions carefully in conjunction with the illustrations before using the appliance. [. . . ] If necessary, use a spatula to remove food from the sides of the jar after switching off the blender. â· Never remove the jar while the blender is operating. â· Make sure the blade unit is securely fitted to the base of the blender jar before you use the appliance. â· Never use any accessories or parts from other manufacturers or which have not specifically been advised by Philips. Your guarantee is void if such accessories or parts have been used. General description (fig 1) A B C D E F G Stopper Lid Opening in the lid Spout Blender jar Level indications Rubber sealing ring 4 H I J K Blade unit Drive axis Motor unit Selector (rotate) O = Off I = On M = pulse ("moment") L Cord storage compartment Cord storage Excess mains cord can be pushed back into the cord storage compartment at the back of the appliance. - Place the mounted jar on to the motor housing and turn in the direction of the arrow until locked (fig. - After putting the ingredients into the jar, place the lid onto the jar by pressing downwards (fig. - Fix the stopper by pushing lightly downwards and turning in the direction of the arrow until locked (fig. Safety switch The appliance is provided with a safety switch which disables the mechanism if the jar is not (or not properly) fitted. Oil for the preparation of mayonnaise) can be poured through the small aperture in the stopper whilst the motor is running (fig. The opening in the lid can be used for adding ingredients whilst the motor is running (fig. Dry ingredients, however, should not be processed longer than 1 minute. â· Cut meat or other solid food into smaller pieces before putting them into the blender jar. [. . . ] - You can clean the motor housing with a damp cloth. Cleaning is easiest when done immediately after use. [. . . ]