User manual PHILIPS HR-2864

[. . . ] Use only a moist cloth to clean the motor unit. Warning Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Do not use the appliance if the plug, the mains cord or other parts are damaged. [. . . ] Soak dried ingredients, such as soy beans, before you put them in the filter. This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Built-in safety lock This feature ensures that you can only switch on the appliance if you have properly assembled the blender jar or mill beaker on the motor unit. Motor unit Control knob with pulse setting and speed settings Blender blade unit Sealing ring Plastic blender jar Level indication Hinged lid Opening in lid Fruit filter Measuring cup Mill beaker (HR2006 only) Before first use Thoroughly clean the parts that come into contact with food before you use the appliance for the first time (see chapter `Cleaning'). using the appliance Blender The blender is intended for fine pureeing , chopping and blending. With the blender you can prepare soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter etc. Preparing the blender for use 1 Assemble the sealing ring on the blender blade unit (Fig. 2 Insert the blade unit into the opening in the bottom of the blender jar (1). Screw the blade unit clockwise onto the bottom of the blender jar (2) until the blade unit it is fixed properly. 6 Switch off the appliance and remove the blender jar with the blade unit attached from the motor unit. Leave the measuring cup and the filter in the jar. 7 Pour out the drink through the pouring lip of the blender jar. 8) Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds. Note:When you process a large quantity, we advise you not to put all the ingredients in the filter at the same time. Start to process a small quantity and let the appliance run for a few seconds. Then switch off the appliance and add another small quantity. Repeat this procedure until you have processed all the ingredients. Always keep the lid on the blender jar during processing. 8 Clean all removable parts immediately after use (see chapter `Cleaning'). You can process wet and dry ingredients. [. . . ] You find its phone number in the worldwide guarantee leaflet. If there is no Customer Care Centre in your country, go to your local Philips dealer. Recipes soy milk Note:This recipe can only be prepared with the filter. Always let the appliance cool down to room temperature after each batch you process. [. . . ]