User manual PHILIPS HR2870

[. . . ] If the blades get stuck, unplug the appliance before removing the ingredients that are blocking the blades. avoid touching the cutting edges of the blade units when cleaning them. They are very sharp and you could easily cut your fingers on them. Always unplug the appliance before you start cleaning the motor unit. [. . . ] 5 Place the stopper into the opening in the lid (1) and turn it until it is firmly fixed (2) (Fig. To avoid spillage, always insert the stopper into the lid before you start processing. 6 Put the plug in the wall socket and switch on the appliance by pressing the low-speed or high-speed button. 7 Hold the motor unit firmly with both hands when operating the appliance. Do not operate the appliance longer than 1 minute at a time. If you have not finished blending after 1 minute, switch the appliance off and wait 1 minute before you continue using it. If the appliance becomes hot, let it cool down before you continue using it. Never reach into the beaker with your fingers or an object (e. , , , , , tips If the ingredients stick to the wall of the blender beaker, switch the appliance off and loosen the ingredients from the wall with a spatula (Fig. To avoid spillage, never fill the beaker above the MAX indication (0. Cut solid ingredients into smaller pieces (1-2 cm) before putting them in the blender beaker. Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a series of small batches instead. Oil) can be poured into the blender beaker through the opening in the lid while the appliance is running (Fig. If the ingredients stick to the blade unit or the wall, remove the chopper beaker from the motor unit by turning it in the direction opposite to that indicated by the arrow, and shake until the ingredients get loose. 1 Cut the ingredients into smaller pieces (approx. 10) Do not fill the chopper beaker beyond the MAX indication. 2 Screw the chopper blade unit (which has four blades) onto the chopper beaker (1). Fix it by turning it in the direction of the arrow (2) (Fig. Turn the assembled chopper upside down and place it on the motor unit (1). Fix the chopper by turning it in the direction of the arrow (2) (`click') (Fig. Put the plug in the wall socket and switch on the appliance by pressing the low-speed or high-speed button (Fig. [. . . ] Use only a moist cloth to clean the motor unit. 5 Wind excess mains cord round the base of the appliance for easy storage (Fig. Environment , Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (Fig. [. . . ]