User manual PHILIPS HR7754

[. . . ] Never connect this appliance to a timer switch in order to avoid a hazardous situation. Do not use the appliance if the mains cord, the plug or other parts are damaged. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] 3 Remove the ingredients from the blade or from the wall of the bowl with a spatula. Built-in safety lock: the kneading accessory only works when the blender cap is assembled properly on the motor unit and the lid is assembled properly on the bowl. Always put the kneading accessory in the bowl before you add the ingredients. Do not exert too much pressure on the pusher when you press ingredients down the feeding tube. Do not let the appliance run too long when you shred (hard) cheese. Otherwise the cheese becomes too hot, starts to melt and turns lumpy. do not use the insert to shred chocolate. Only use the blade (page 25) for this purpose. Built-in safety lock: the inserts only work when the blender cap is assembled properly on the motor unit and the lid is assembled properly on the bowl. When you shred or granulate soft ingredients, use a low speed to prevent the ingredients from turning into a puree. When you have to process a large amount of ingredients, process small batches and empty the bowl between batches. When you have finished pressing or when you want to remove the pulp, switch off the appliance and remove the bowl from the appliance with the sieve and cone on it. Always let the appliance cool down to room temperature after you have processed two batches. Never open the lid when the blade rotates. Built-in safety lock: you can only use the blender when the rib on the blender jar is directly opposite the print on the motor unit. - Do not exert too much pressure on the handle of the blender jar when you assemble or disassemble the jar. - Never fill the blender jar with ingredients hotter than 80ºC. - To add liquid ingredients during processing, pour them into the blender jar through the hole in the lid. - Pre-cut solid ingredients into smaller pieces before you process them. - Soak dried ingredients , such as soy beans , before you process them. - If you want to prepare a large quantity, process small batches of ingredients instead of a large quantity at once. Milk), do not put more than 1 litre in the blender jar to avoid spillage. [. . . ] Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Problem The food processor does not work. Solution All functions except the blender only work when the blender cap is assembled on the motor unit. [. . . ]