User manual PHILIPS HR7771/53

[. . . ] Register your product and get support at Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. A Fine/medium slicing disc (yellow) (HR7771 only) B Fine/medium shredding disc (yellow) (HR7771 only) C Emulsifying disc (HR7771 only) D Kneading accessory E Blade unit F Protective cover G Motor unit H Speed selector I Inner pusher J Lid of food processor bowl K Tool holder L Bowl M Safety lock N Pulse/Easy Clean button O Outer pusher P Feeding tube Q Fine/medium slicing disc (green) (HR7772 only) R Fine/medium shredding disc (green) (HR7772 only) S Balloon beater (HR7772 only) T Citrus press cone (HR7772 only) U Citrus press sieve(HR7772 only) V Stopper W Lid of blender jar X Jar Y Rubber ring Z Blade unit Read this user manual carefully before you use the appliance and save it for future reference. general Danger -- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. [. . . ] Make sure the egg whites are at room temperature. You can use the balloon beater to whip cream and to whiskeggs, egg whites, instant pudding, mayonnaise, sponge cake mixture and other soft ingredients. 2 Put the balloon beater on the tool holder in the bowl(Fig. Turn the lid clockwise (2) to fix it (`click')(Fig. 5 Select the speed that corresponds with the colour of the accessory(Fig. 6 When you have finished processing, turn the speed selector to 0 and unplug the appliance(Fig. 7 Always clean the balloon beater after use. See chapter cleaning for instructions on how to take the balloon beater apart and how to clean it. Tips -- Do not use the balloon beater to prepare cake mixtures with butter or margarine or to knead dough. Use the kneading accessory for these jobs. -- Make sure the bowl and the balloon beater are dry and free from grease when you whisk egg whites. Make sure the egg whites are at room temperature. 1 Place the rubber ring on the blade unit(Fig. 2 Place the blade unit in the bottom of the blender jar (1) and screw the blade unit clockwise (2)(Fig. 3 Place the blender jar on the motor unit (1) and turn it clockwise to fix it (2). The handle has topointto one of the four corners of the motor unit(Fig. Do not exert too much pressure on the handle of the blender jar. 4 Put the ingredients in the blender jar(Fig. Never fill the blender jar with ingredients hotter than 80ºC. To avoid spillage, never fill the jar above the maximum level indication, particularly not when you blend hot liquids. 5 Place the lid on the blender jar (1) and turn it clockwise to fix it (2)(Fig. 6 Select the speed that corresponds with the colour of the accessory(Fig. [. . . ] 3 Put the sliced cucumber into a serving bowl. 4 Put the tool holder in the bowl and place the blade unit on the tool holder. Press the pulse/Easy Clean button to have better control over the chopping process. 7 Add the yoghurt, mustard, salt and pepper and process for a few more seconds until a homogeneous mixture is obtained. [. . . ]