User manual PHILIPS HS655

[. . . ] ⷠIf using the Philishave system for the first time, please bear in mind that your skin may need about two weeks to become fully accustomed to the new shaving method. Before using the shaver for the first time and also if the shaver has not been used for a month or more, charge it for at least 24 hours. ⷠDo not allow the shaver to come into contact with water. [. . . ] Then move the shaving unit against the direction of the growth of the hairs. The trimmer is not required for long hairs in the neck area; these hairs can easily be shaved off with the shaving unit. We advise you to charge the batteries at temperatures between 5° C and 35° C (40° F and 95° F respectively). Keep the cassette open if you charge the appliance in it. - Slide the on/off switch (C) downwards. - Insert the small plug firmly into the connector (E) up to the indication mark. After 8 hours the shaver will be fully charged. This allows cordless shaving for a period of about 2 weeks. The number of shaves per charge is dependent upon your beard type and shaving time. Always switch the shaver off before carrying out maintenance or cleaning. In general, the shaving unit needs cleaning only once a week. Clean the guard slots using the short bristled end of the brush. Clean the inside using the long bristled end of the brush. Every three months If your skin is of an oily type or if you have been using a preshave lotion, this procedure should be carried out once a month. Then lift the cluster frame holding the shaving heads from the shaving unit. Slide one shaving head (guard and cutter) out of the frame. Keep your finger under the shaving head to prevent the cutter from falling out of the guard. Keep the guard and cutter together because each pair has been especially ground to match each other. [. . . ] 18-21, page 42) - Remove the plug from the wall socket. - Unscrew the two countersunk screws at the back side of the shaver. For this purpose you can use a small screwdriver (width approx. [. . . ]