User manual PHILIPS HS8040

[. . . ] Important Read this user manual carefully before you use the appliance and save it for future reference. Danger - Make sure the adapter does not get wet (your adapter may differ from the one shown in the figure). warning - The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. [. . . ] Note: If the shaver doesn't shave as well as it used to and you are unable to solve this with the cleaning methods described in this chapter, consult chapter `Frequently Asked Questions' for an extra-thorough cleaning method. Maintenance 1 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Transport If you are going to store the shaver for a longer period or if you are going to travel, it is possible to lock the shaver. The travel lock prevents the shaver from being switched on by accident. Activating the travel lock 1 Make sure the shaver is switched off. Wait until the shaver produces a brief humming sound and the top charging light on the shaver flashes a few times. Note: If you accidently press the on/off button first, the shaver starts working . If this happens, press the on/off button again to switch off the shaver. Note: If you press the on/off button when the travel lock is activated, the top charging light flashes green to indicate that the shaver is locked. tip: Press the on/off button to check if the travel lock is activated. If the travel lock is activated, the shaver does not go on. Wait until the shaver produces a brief humming sound and the top charging light on the shaver flashes a few times. Note:You can also deactivate the travel lock by placing the shaver back into the charger. Replacement Shaving conditioner cartridge For hygienic reasons, we advise you to replace the shaving conditioner cartridge twice a year. You can order a new shaving conditioner cartridge from Philips Consumer Care by telephone. 2 Insert the lug at the top of the new shaving conditioner cartridge into the slot in the rim of the shaver (1). Then press the bottom part of the cartridge with your thumb (2) to attach the cartridge to the shaver (`click'). fill the shaving conditioner cartridge (see chapter `Getting started'). Shaving unit Replace the shaving unit every year for optimal shaving results. Only replace the shaving unit with an HS85 Philips Shaving Unit. 1 Pull the old shaving unit off the shaver. 2 Put the new shaving unit on the shaver (`click'). [. . . ] Why doesn't the shaver work when I press the on/off button?Question Answer Dried shaving conditioner may block the shaving heads in the shaving unit. Clean the shaver thoroughly before you continue shaving (see chapter `Cleaning and maintenance'). You may not have reassembled the shaving unit properly after extra-thorough cleaning. [. . . ]