User manual PHILIPS HTL2151

[. . . ] For product support, visit Para obtener asistencia técnica, visite Pour en savoir plus sur l’assistance sur les produits, visitez le site www. hd. philips. com HTL2151 User manual Manual del usuario 1 15 Manuel d'utilisation 29 EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U. S. A. , Canada, Puerto Rico, or the U. S. Virgin Islands, contact Philips Customer Care Center at 1-866-310-0744 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989 ES: Para obtener mas informacion, llame al servicio de soporte al cliente de su pais. • Para obtener asistencia en los Estados Unidos, en Canada, Puerto Rico o en las Islas Virgenes de los Estados Unidos, comuniquese con Centro de atencion al cliente de Philips al 1-866-310-0744 • Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA, 01 800 839 1989 Solo Para Mexico. [. . . ] f SURR Toggle between stereo and virtual surround sound. Remote control This section includes an overview of the remote control. a g BASS +/- / RESET • Increase or decrease bass. • Reset your bass level to default setting mode. h TREBLE +/- / RESET • Increase or decrease treble. • Reset your treble level to the default settings programmed at the factory. i OPT Switch your audio source to Optical Mode. j Mute or restore volume. b k c j d i e f k COAX Switch your audio source to Coxial Mode. Connectors g This section includes an overview of the connectors available on your SoundBar. h EN 5 English (Standby-On) Switch the SoundBar On or to standby Off. Top connectors 3 Connect b This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type •• Before you make or change any connections, make sure plate at the back or bottom of the product. that all devices are disconnected from the power outlet. a a (USB) Audio input from a USB storage device. b AUDIO-IN Audio input from an MP3 player (3. 5mm jack). Rear connectors Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. d a b c e a AUDIO IN Connect to an analog audio output on the TV or an analog device. b DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. d SUBWOOFER Connect to the supplied subwoofer. e AC MAINS~ Connect to the power supply. 6 EN Play audio from TV or other devices through your Soundbar. Use the best quality connection available on your TV and other devices. Good quality audio Option 1: Connect audio through a digital optical cable Best quality audio 1 TV Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • [Stereo]: Two-channel stereo sound. Ideal for listening to music. EN 1 2 Connect a USB storage device to the SoundBar. »» The play starts after a few seconds. 8 Note •• This product may not be compatible with certain types •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 500mA. [. . . ] Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The company is not liable for any damage to or loss of any , programs data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than an Authorized Service Location, (c) to a product or a part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers. [. . . ]