User manual PHILIPS HTL 9100

[. . . ] Always there to help you Register your product and get support at www. philips. com/welcome HTL9100 Question?Contact Philips User manual Contents 1 Important   Safety   Care for your product   Care of the environment   Compliance   Help and support   2 2 3 3 3 3 4 4 5 6 7 7 8 8 8 9 10 10 10 12 12 12 13 13 14 14 14 14 15 16 2 Your SoundBar   Indicators on the main unit   Remote control   Connectors   Wireless speakers   Wireless subwoofer   3 Connect and set up   Charge speakers   Pair up with speakers/subwoofer   Place speakers   Connect to TV   Connect digital devices through HDMI   Connect audio from TV and other devices   4 Use your SoundBar   Adjust the volume   Choose your sound   MP3 player   Play music via Bluetooth   Auto standby   Apply factory settings   5 Wall mount your SoundBar   Wall mount   6 Product specifications   7 Troubleshooting   EN 1 1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire!• Never expose the product and accessories to rain or water. [. . . ] • When the pairing fails or pairing remains undone, the indicator blinks red slowly. • When the speaker is being charged (docked into the main unit), the indicator lights up amber. • When the speaker goes to standby, the indicator blinks amber. b Connection key Press with a pin to enter the pairing mode for the speaker. c POWER ON Press to turn on the wireless speaker if it automatically goes to standby. a CONNECT Press to to enter the pairing mode for the subwoofer. b Subwoofer indicator • When the power is turned on, the indicator lights up. • During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly. • When the pairing succeeds, the indicator lights up white. • When the pairing fails, the indicator blinks white slowly. c AC MAINS~ Connect to the power supply. EN 7 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate •• Before you make or change any connections, make sure at the back or bottom of the product. that all devices are disconnected from the power outlet. »» When fully charged, the indicator on the speaker lights up white for 30 seconds. Note •• It may take around 2 hours to fully charge the speakers. If the pairing fails, repeat the steps above. REAR L REAR R Note •• Surround sound depends on factors such as room shape and size, type of wall and ceiling, windows and reflective surfaces, and speaker acoustics. Experiment with the speaker positions to find the optimum setting for you. 4 Follow these general guidelines for speakers placement. 1 2 3 Place speakers For best sound effect, position all the speakers towards the seating position and place them close to your ear level (seated). Seating position: This is the center of your listening area. Place the SoundBar in front of the seating position. REAR L (rear left) and REAR R (rear right) surround speakers: Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall. 4 Dock the surround speakers You can also dock your surround speakers onto the main unit to listen to audio, for example, watching TV shows and news. EN 9 Note •• If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through your SoundBar. (see 'Connect audio from TV and other devices' on page 10) •• If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV. However, some of the features may not be available. Connect to TV Connect your SoundBar to a TV. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV. Connect digital devices through HDMI Connect a digital device such as a set-top box, DVD/Blu-ray player, or games console to your SoundBar through a single HDMI connection. [. . . ] • The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. [. . . ]