User manual PHILIPS HTR5205

[. . . ] Digital AV Receiver System HTR5205 User Manual Manual Pengguna 6 28 52 76 welcome. 1_htr5205-98_EN. indd 1 2007-03-30 11:53:44 AM O X X O X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O X O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 ­ 2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006. Environmental Protection Use Period This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate so that the use of these [substances or elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets. Battery labeling logo Environmental Protection Use Period This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements contained in the battery will not leak or mutate so that the use of these [substances or elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets. 2 1_htr5205-98_EN. indd 2 2007-03-30 11:53:48 AM Index English ------------------------------------------4 Manufactured under license from Dolby Laboratories, `Dolby', `Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories. English Bahasa Melayu ----------------------------- 28 Manufactured under license from one or more of the following DTS, Inc. No's: 5, 451, 942; 5, 956, 674; 5, 974, 380; 5, 978, 762; 6, 226, 616; 6, 487, 535 and other U. S. [. . . ] or > until `CENTER DELAY' appears. Rotate the VOL control to change the delay time. Select from : 5ms, 3ms, 2ms, 1ms or OFF (default setting). To remain with the previous setting, do not rotate the VOL control in the next five seconds. 16 1_htr5205-98_EN. indd 16 2007-03-30 11:53:52 AM Getting Started (continued) To adjust the audio delay for the rear speaker Press . or > until `REAR DELAY' appears. Rotate the VOL control to change the delay time. Select from : 15ms, 12ms, 9ms, 6ms, 3ms or OFF (default setting). To remain with the previous setting, do not rotate the VOL control in the next five seconds. (Only available in DOLBY DIGITAL, DTS, PRO LOGIC, MOVIE, MUSIC modes) You can adjust the speakers trim level within the range of ­10dB to +10dB. English Adjust the speaker trim level A Press and hold PROGRAM on the front panel for five seconds to access the system setup. B Press . or > until `TEST TONE' appears. C To confirm your settings, press PROGRAM on the front panel. C Press PROGRAM on the front panel. Each speaker will be tested automatically. Sound will output from each speaker for two seconds. To adjust the trim level, rotate the VOL control. D To exit from the setup menu, press . or > to select `EXIT'. Helpful Hints: ­ Use longer delay time settings when the rear speakers are closer to the listener than the front speakers. ­ In DISC 6CH and RADIO mode, the SETUP MENU is not available. ­ In STEREO mode, when CENTER DELAY, REAR DELAY or TEST TONE is selected, the display panel will show "UNAVAILABLE FOR STEREO MODE. ". Press SURROUND button to select another surround mode. ­ AUTO PROGRAM is only available RADIO mode only. D Once complete, press PROGRAM on the front panel. E To exit from the setup menu, press . or > to select `EXIT'. Helpful Hint: ­ To remain with the previous setting, do not rotate the VOL control whilst the individual speaker is tested. After two seconds, the next speaker will be tested, adjust the VOL control if necessary. Adjust the speaker output levels (Not available in STEREO mode) You can adjust the rear speakers, centre speaker and subwoofer output levels by comparing the sound from the front speakers. A In `DISC 6CH' mode, press SPEAKER SELECT button on the remote control to view each individual channel trim value. B To adjust its level, press the VOL+buttons on the remote control. 17 1_htr5205-98_EN. indd 17 2007-03-30 11:53:52 AM Sound and Volume Controls Before you start. . . Ensure the speakers and subwoofer are connected. [. . . ] ­ Reduce the distance between the remote control and this unit. ­ Batteries are weak, replace the batteries. ­ Point the remote control directly toward the IR sensor. ­ Check that the batteries are inserted correctly. [. . . ]