User manual PHILIPS HTS3510

[. . . ] Register your product and get support at www. philips. com/welcome HTS3510 HTS3520 Contents 1 Notice Copyright Compliance Mains fuse (UK only) Trademarks 8 2 2 2 2 2 3 3 4 4 5 5 5 7 7 7 8 8 8 8 9 10 10 10 11 11 12 12 12 12 13 13 14 14 14 9 Product speciÀcations Troubleshooting 14 16 17 English 10 Index 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features for disc or USB Play from radio Play audio from TV or other devices Create MP3 audio Àles 6 Change settings Access the setup menu Change general settings Change audio settings Change video settings Change preference settings 7 Update software Check software version Update software from a CD-R or USB EN 1 1 Notice Trademarks Copyright Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. This item incorporates copy protection technology that is protected by U. S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Copyright in the UK Recording and playback of material may require consent. [. . . ] Press BACK and go to the picture folder. Select a picture, then press OK to start slideshow. Press again to stop music. 1 2 3 4 5 Selects a preset radio station. Press and hold to erase the preset radio station. Press to stop the installation of radio stations. PROGRAM Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for Àve seconds to reinstall radio stations. / Note Synchronize audio with video If the audio and video are not synchronized, you can delay the audio to match the video. Press and hold AUDIO SYNC until the audio sync message appears on the display panel. Press +/- within Àve seconds to sync the audio with your video. · AM and digital radio are not supported. · If no stereo signal is detected, or if fewer than Àve stations are found, you are prompted to install the radio stations again. · For the best reception, place the antenna away from the TV or other sources of radiation. 1 2 10 EN Press AUDIO SOURCE repeatedly to select the audio output of the connected device . Create MP3 audio Àles Note Use the home theater to convert audio CDs into MP3 audio Àles. Insert an audio CD (CDDA/HDCD) into the home theater. Connect a USB storage device to the home theater. Select [Yes] and press OK to conÀrm. · During the conversion process, do not press any buttons. 1 2 3 4 · DTS CDs and copy-protected CDs cannot be converted. · Write-protected or password-protected USB storage device cannot be used to store MP3 Àles. CREATE MP3 OPTIONS Speed Bitrate CRT ID3 Device Normal 128kbps Yes USB1 TRACK Track01 Track02 Track03 Track04 Track05 Track06 Track07 04:14 04:17 03:58 04:51 03:53 04:09 04:38 SUMMARY Select Track Time Start 0 00:00 Exit Select All Deselect All 5 Select the settings in the [OPTIONS] panel, then press OK . · [Speed] : Selects the write-to-Àle speed. · [Bitrate] : Selects the conversion quality. · [CRT ID3] : Copies information on the tracks in the MP3 Àles. · [Device] : Selects the USB device which you use to store the MP3 Àles. · [Select All] : Selects all tracks. · [Deselect all] : De-selects all tracks. 6 7 EN 11 English Play audio from TV or other devices 8 Select [Start] in the menu to convert, then press OK . [. . . ] · Ensure that the [HDMI Audio] is enabled. · Connect an audio cable from the audio input on the home theater to the audio output on the TV, then press AUDIO SOURCE repeatedly to select the correct audio source. · Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theater. 2) Press +/- within Àve seconds. Play Disc cannot be played. [. . . ]