User manual PHILIPS HTS3538

[. . . ] Register your product and get support at www. philips. com/welcome HTS3538 HTS3539 Contents 1 Important Safety Care for your product Care of the environment Help and support 2 2 2 3 3 3 3 3 4 6 6 6 7 8 8 9 9 9 10 10 11 12 12 12 13 13 13 14 14 14 14 14 Check software version Update software through USB 7 Productspecifications 8 9 Troubleshooting Notice 16 17 19 19 19 19 19 20 2 Your home theater Main unit Connectors Remote control 3 Connect and set up Copyright Mains fuse (UK only) Compliance Trademarks Connect speakers Connect to TV Connect audio from TV and other devices Set up speakers Set up EasyLink (HDMI-CEC control) 10 Index 4 Use your home theater Discs Data files USB storage devices Audio, video, and picture options Radio MP3 player Create MP3 files Choose sound 5 Change settings Language settings Picture and video settings Audio settings Parental control settings Display settings Energy saving settings Restore default settings EN 1 English 6 Update software 15 15 15 1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Riskofelectricshockorfire!· Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. [. . . ] · Disc Go To: Enter the disc time to skip to a specific part of the disc. · Track Go To: Enter the track time to skip to a specific part of the track. · Select Track: Select a specific track. 10 EN Video options 2 Press INFO. » The video options menu is displayed. Depending on the video source, some options are not available. Press the Navigation buttons and OK to select and change: · [Title]: Select a specific title. · [Chapter]: Select a specific chapter. · [Track]: Select a specific track (for VCD/ SVCD only). · [Audio]: Select audio language for video. · [Subtitle]: Select subtitle language for video. · [Angle]: Select video scenes recorded in different camera angels. · [TT Time]: Skip to a specific part of the video by entering the title time. · [Ch Time]: Skip to a specific part of the video by entering the chapter time. · [Disc Time]: Skip to a specific part of the video by entering the disc time (for VCD/ SVCD only). · [Track Time]: Skip to a specific part of the video by entering the track time (for VCD/SVCD only). · [Preview]: Select a content preview for disc. · [Repeat]: Select a repeat mode. · [Time Disp. ]: Select the information of time display. Listen to FM radio on your home theater, and store up to 40 radio stations. Note · AM and digital radio are not supported. · If no stereo signal is detected, or if fewer than five stations are found, you are prompted to install the radio stations again. 1 2 Extend the FM antenna at the back of your home theater and place it away from the TV or other sources of radiation. » If you have already installed the radio stations, the last channel that you listened to is played. 3 » If you have not installed any radio stations, the message AUTO INSTALL. . . PRESS PLAY appears on the display panel. press . Use the remote control to listen or to change radio stations. [. . . ] · Select the correct character set (see 'Subtitles' on page 10). Cannot read the contents of a USB storage device. · Make sure that the format of the USB storage device is compatible with the home theater. · Make sure that the file system on the USB storage device is supported by the home theater. [. . . ]