User manual PHILIPS ID9370B

[. . . ] Charge the handset(s) 24 hours before use. Safety information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. [. . . ] Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll to the specific handset you want to call and press mSELECT. If the handset does not belong to ID9370 range, this function may not be available. Transfer an external call to another handset 1. 2. During the call, make a long press on c key to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll to the specific handset you want to call and press mSELECT. The called handset rings. If there is no answer from the called handset, press c key to resume the external call. Press r key on the called handset to answer the internal call, where both internal callers can talk. Press e key on the first handset to transfer the external call to the called handset. Press c key once to switch between an internal call and external call. Switch between an internal and external call 15 EN Call Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. Press and hold c to put the external call on hold and start the intercom procedure (the caller can no longer hear you). Long press c to display the handset numbers which are available for intercom. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll to the specific handset you want to call and press mSELECT. Press r key on the called handset to answer the internal call, where both internal callers can talk. Press and hold c for 2 seconds on the first handset to start the three-party conference, whereby Conference is displayed on the screen. TIP If Conference mode is activated, a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress. 16 Personal Settings Personal Set Handset Tones Wallpaper Contrast Handset Name Language Babysit Mode Backlight Time Theme Colour EN Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones and press mSELECT again to enter Ring Volume. Scroll : to your desired volume level and press mSELECT to confirm. [. . . ] One of Philips' leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. EN 3. [. . . ]