User manual PHILIPS KALA 200

[. . . ] INSTALLING TELEPHONE AND BASE STATION · · · · · · Location of the base station Inserting/Replacing batteries Telephone connection Charging/Recharging the telephone Telephone range Installing another KALA 200 handset INSTALLING TELEPHONE AND BASE STATION 4 THE DISPLAY icon status on 1/4 full off flashing on off on flashing on flashing on on flashing on off flashing description full less than 1/2 hour discharged charging new log entry no new log entry being accessed or incoming call (Caller identification service*) programming call in progress call arriving external call on hold or if a second or another handset: internal call in progress being accessed or incoming call (Caller identification service*) programming in range handset not registered to the base station out of range Ringing melodies setting Additional handset setting Settings Kala 200 (TD6131) Location of the base station In order to reduce the risk of interference, place the base station at least 1m away from any other electrical appliance (telephone, television, computer, etc. ) The base station should be placed on a flat surface. The base station should not be kept in a damp room, near a heat source or close to obstacles such as thick walls or metallic structures. Inserting/Replacing batteries + battery incoming call log 3. PRESENTATION OF TELEPHONE AND ACCESSORIES 4. [. . . ] Batteries are low (the insert battery icon symbol is displayed). The handset is out of range. Solution Check the connections and ensure you have used the telephone cable provided in the box. Charge batteries (see Installing telephone and base station Page 2). Register the handset to the base station (see page 9). Take the handset off the base station and put it back again. Please contact your PHILIPS dealer in order to purchase new rechargeable batteries (see Inserting/Replacing batteries Page 2). Charge batteries (see Installing telephone and base station Page 2). Delete some entries to free memory spaces. Try to plug the base station in another place. Please select another CLI. Programming icons: · on: programming mode (consultation) or during a modification · off: normal mode · flashing: options can be selected 3 icons are displayed on the screen: - Volume and melody settings - To register the handset with another base - Other programming option settings Press to enter the programming options. once or several times. Yes · icon not displayed or blinking. - Enter the following functions by pressing Melody programming options Function number 1/4 To select one of the icons, use the key and and then validate your choice by pressing the key. 1x 2x For instance: how to change the melody. Use the same key to exit the log. Use level 1/4 to select the melody volume. Scroll through the different volume settings using the and keys. The default setting is "+++" (3). 4 choices within this menu Default value Bottom of the base Philips has designed this product to work on PSTN line and cannot guarantee the complete application on ISDN network. The KALA 200 Plus is compliant with operator's analogue interface. The KALA 200 Plus can only be connected to the British telephone network. The geographical area in which the equipment may be used is shown on the label on the bottom of the base station. Product may only be used in this zone. Note: the screen will show the default or selected value. If registering an additional handset, you will need to enter the RC code (4-figure access code) shown on the bottom of the base station (see Page 9). Enter 4 figures when "0000" is displayed (and the scroll arrows have disappeared). Settings programming options Function number 1/5 Programmable functions Enters number of different CLI Enters the dial mode(2) Enters network type(4) Enters callback type(5) (long/short flash) Inserts automatic pause(6) (3) Select Consulting the log You will only be able to access the information shown on the screens below if you have subscribed to the Caller identification service. Default value 1 Depends A Depends NO List of CLI avalaible TONE, PULSE A (residential), B, C, D (PABX) *** (short), ****** (long) NO, YES 11 YOUR PHILIPS WARRANTY Dear customer, 12 PHILIPS SERVICE CENTRE FREEPOST (SCE10569) RUGBY Warwickshire CV21 1BR NB: Philips recommend all parcels to be returned to the Philips Service Centre be submitted over the counter at your Post Office and a proof of postage requested. Please note the Royal Mail insurance limit for lost/damage using the Freepost service is £26. [. . . ] The CE marking certifies compliance with technical regulations in accordance with the Directive 1999/5/EC for the safety of the user, electromagnetic perturbations and for radio spectrum. Power requirements This product requires an electrical supply of 220-240 volts, alternating monophased current, excluding IT installations defined in standard EN 60-950. The electrical network is classified as dangerous according to criteria in the standard EN60-950. The only way to power down this product is by unplugging the power cable from the electrical outlet. [. . . ]