User manual PHILIPS KEY008-17B

[. . . ] 12 MEMORY indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Taking pictures, lighting level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Transferring/ viewing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-18 Mass storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 7 USB port Connect to your computer's USB port to charge the camera/ transfer files. 8 USB cover detach the protective USB cover to reveal the camera's USB port. 9 Light level sensor When you press the shutter button halfway, the sensor lights up red/ blinks/ remains unlit according to surrounding light level conditions. 0 POWER indicator lights up green/ blinks according to power status/ file transfer. MEMORY indicator lights up yellow/ blinks/ remains unlit according to the available memory on the camera. TIP: ­ Make sure the lens is not obstructed / covered when taking snaps! 5 power on/ off turn clockwise to switch on, turn anti-clockwise to switch off. 6 grip place your finger/ thumb here to turn the power control. The model and production numbers can be found next to the USB port (please remove the USB cover to see) 7 Minimum computer system requirements Windows system requirements ­ ­ ­ ­ ­ ­ Pentium® MMX 166MHZ processor or better USB port with Windows® 98 / Me / 2000 / XP 96MB RAM 50MB free hard disk space CD ROM drive video display card CAUTION! Computers that were upgraded from Windows 95 may not have USB compatibility!For Windows 98 users only: · WHEN CONNECTING THE CAMERA FOR THE VERY FIRST TIME TO CHARGE UP/ TRANSFER FILES, MAKE SURE YOU ONLY DO SO AFTER YOU HAVE INSERTED THE SUPPLIED CD-ROM INTO THE CD-ROM DRIVE FOR INSTALLTION OF THE REQUIRED DRIVERS. Mac system requirements ­ G3 or better ­ Mac OS 9 - X About KEY camera KEY camera is a solid state, wearable, digital camera: ­ captures VGA (640 x 480) resolution still images ­ stores hundreds of still images in JPEG format ­ 1. 3 Mega pixel output when you use with the supplied picture enhancement software ­ transfers image files using Windows File Manager or Windows Explorer, when the camera is connected via USB to your computer ­ directly powered through your computer during file transfer to the camera. 8 Supplied accessories Make sure these items are in the package. If any item is missing, please contact your dealer. 1x CD-ROM (Photo Manager software & user manuals) 1x Quick Start Guide 1x neck strap 1x Safety & Warranty booklet Neck strap Thread the neck strap through the hole as shown. 9 Power supply This camera is powered by a built-in USB rechargeable lithium battery which you can charge direct from your computer. TIP: ­ When you use the camera for the very first time, you'll need to charge the battery before taking pictures. USB rechargeable battery 1 Check the camera is in the power off position. 3 Connect the camera's USB port to the USB port of your computer. While charging the POWER (green) indicator blinks. Make sure you leave your PC switched on during charging. 3 hours, the battery is fully charged, 4 Disconnect the camera and replace the USB cover. TIP: ­ ­ ­ ­ When you detach the USB cover, keep it in a safe place. To avoid damaging the USB port, always replace the USB cover when not connecting to your computer. During USB connection/ battery charging, by default taking pictures is not possible. For Mac users: When connecting the camera to your computer, avoid using the USB connection on your Mac keyboard as it doesn't have sufficient power to detect your camera. 10 POWER indicator The POWER indicator lights up green according to battery power level. Battery power fully charged low* empty POWER indicator lit blinks unlit fully charged TIP: * when the camera is connected to your computer for battery charging/ file transfer, the POWER indicator also blinks. batteries contain chemical substances, so they should be disposed of properly. 11 Switching On/ Off Switching on Turn the power control 90° clockwise as shown. You will hear a click. The POWER (green) indicator lights up and you will hear a double beep. PHILIPS is in the vertical position and the lens is revealed. Switching off manually Turn the power control 90° anti-clockwise as shown. You will hear a click. The POWER light goes out. PHILIPS is in the horizontal position and the lens is covered for protection. Power off TIP: ­ Always turn off your camera when not taking pictures. [. . . ] · For Windows 98 users only, check you have installed the USB driver provided from the installation CD-ROM (see page 3). · Avoid using the USB connection on your Mac keyboard as it doesn't have sufficient power to detect your camera. the rear of your Mac's CPU instead. Pictures are poor/ blurred/ too dark ­ Picture taken in low/ poor lighting. [. . . ]