User manual PHILIPS LC5241

[. . . ] Controls and connections TM ª £ Mouse Menu Video Cancel Data Standby /On · § Mouse Menu Video Cancel Standby /On Data fl Auto image D-Freeze A/V Mute º D-Zoom D-Keystone Volume fi > < / ¤ fig. Controls and connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Packaging contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Things You Should Know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. [. . . ] Audio can be turned on and off for video related input (Video, S-Video) or Data (or YCbCr) input from the menu (see SOUNDMUTE on page 20). ­ The figures in brackets like (2) correspond to the figures in the accessories diagram. The figures in circles like # correspond to the figures in fig. 2 of `Controls and connections'. Connecting to video equipment S-VIDEO SIGNAL Scart adapter (optional) (3) Caution!Always switch off the projector before making any connections. COMPOSITE VIDEO SIGNAL (7) (4) Scart adapter (optional) # Audio in Mouse Data / YCbCr ^ S-Video in Video in (3) (2) 1. Connect the S-Video OUT socket of a S-VHS VCR, DVD, Laser Disc player, video camera or TV to the S-Video in socket ^ of the projector. For this use the S-Video connection cable (supplied) . Connect the audio OUT L/R sockets of the S-VHS VCR, DVD, Laser Disc player, video camera or TV to the Audio in socket # of the projector. For this, use the red and white audio connectors of the audio conversion cable. Insert the white plug into the L socket and the red plug into the R socket. In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region): 1. The projector will not turn on after 1100 hours. (It will turn off if it is in use) For lamp cartridge replacement see the section under Maintenance. ­ When the lamp is on, the Standby/On indicator lights up green. Select the required source (Data/YCbCr, Video or S-Video) by pressing the Input selection button on the projector or the Video/Data buttons on the remote control. Preparation On Screen Display menu - General explanation All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays and with help of Menu and Cursor Control on the remote control. The basic settings, concerning image and lamp usage, are presented in the normal menu. This menu will be displayed when the Menu button is pressed with the remote control Flip cover closed. Advanced feature settings are presented in the advanced menu. This menu will be displayed when the Menu button is pressed with the remote control Flip cover open. Note: The Input selection button on the projector toggles between Data/YCbCr, Video or S-Video input. Switch on the PC or start video playback. ­ A feedback message appears on the screen, indicating the selected source. Feedback messages - General explanation Feedback messages are displayed in the center of the screen. They are displayed when: ­ a signal comes up or goes down, ­ when an input source is changed, ­ when the A/V Mute is addressed, ­ when the Auto image function is set to ON. [. . . ] Is there any obstacle between the remote control and the photoreceptors of the main unit?Is the remote control being used outside its effective range?Is there a fluorescent light or other strong light source close to the photo receptor? No image · · · · · · · Has the connected input been selected?Is the cable correctly connected to the input jack? [. . . ]