User manual PHILIPS LFH0955

[. . . ] For product information and support, visit Welcome Product highlights What's in the box Important Safety Disposal of your old product Technical support and warranty Get started 6 Overview ­ controls and connections 6 Overview ­ display indicators and symbols 7 Install the batteries 8 Recharge the batteries 8 Recharge the batteries using the power supply 8 Recharge the batteries through the USB cable 8 Recharge the batteries through the docking station 9 Insert and eject the memory card 9 Format a new memory card 10 Activate the digital recorder 10 Set the language 11 Set the date and time 11 Power-save mode 11 Using your meeting recorder 12 Before recording 12 Meeting recording: connect and position the meeting microphones 12 Connect the remote control 13 Interview recording: connect the click-on interview microphone 13 Recording 14 Create a new recording Add to a recording (append) Finish (lock) a recording Change the recording format Adjust the microphone sensitivity Set the sound filter Monitor recording Playback Overview playback functions Noise reduction Delete Delete a file Delete part of a recording Delete all dictations Use more of your meeting recorder Use Philips SpeechExec software Advanced configuration Download recordings to the PC Use voice-activated recording Work with index marks Insert an index mark Delete an index mark Delete all index marks Assign an author's name Display and sound functions Setting the language Setting date and time Backlight Record lamp LCD contrast Device beep Menu list What's in the box Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, visit our Website for support information such as user manuals, software downloads, warranty information and more: www. Easy to use out-of-the-box solution · elegant metal carrying case for portability · Quick set-up with innovative meeting microphones · 360 degree sound pick-up for optimal recording · Boundary layer design using the sound pressure · For product information and support, visit For product information and support, visit To avoid short circuit, do not expose the product to rain or water. ⷠDo not expose the device to excessive heat caused by heating equipment or direct sunlight. [. . . ] 2 Press the smart button 2 to advance the arrow () to the next entry. 3 After setting the day, press the smart button 2 to advance the settings to the correct time. 1 Set the language When using the digital recorder for the first time, you will be prompted to set the language. 1 Before recording The digital recorder has a built-in monaural microphone that is used for recording when no external microphone is connected. To enhance sound quality and cover a wider range during recording, use the meeting microphones (for meeting recording) or the click-on interview microphone (for interviews). 1 Meeting recording: connect and position the meeting microphones 1 Make sure that the recorder is stopped. 1 4 For optimal recording quality, position the microphones on the table so that all participants are not more that 2 meters or 6. E Tip For large conferences, the operating range can be extended by joining together and connecting three microphones on each of the two microphone sockets of the Y adapter. D Note When the remote control is connected, all buttons on the digital recorder are still usable except the REC button. 1 Create a new recording Follow these steps to create your first recording with the Conference Recording System: 1 A memory card must be inserted into the memory card slot. See Insert and eject the memory card on page 9 for more information. 2 Slide the On/Off switch to the ON position to switch on the digital recorder. 1 3 Press the NEW smart button 2 to create a new recording. The following information is displayed: a Remaining recording time b Recording mode c Current position in the recording d Recording time e File name f Recording level meter (left channel) g Recording level meter (right channel) Press the EOL button during recording to mark the present recording as finished and automatically continue recording into a new file. An index mark can be set by pressing the INDEX button during record or playback. See Work with index marks on page 23 for more information. 2 Add to a recording (append) Regardless of the current position in the recording, additions to a recording are always appended at the end of a file without overwriting the existing recording. Follow these steps to make additions to your recording: 1 Press the + or ­ button 1 while stopped to select the file to be appended. B 4 To make changes to the recording, press the EOL button 2 again to remove the finished mark. E Tip Philips SpeechExec software can be configured to download finished files only from the digital recorder to the PC. C Caution Locked files are deleted when the memory card is formatted or the delete-all-dictations function is used. 4 Change the recording format The recording format determines the audio quality of your recordings and affects the number of audio files that can fit on the memory card. [. . . ] 5 Press the smart button 3 to advance the arrow () to the next entry. 6 After setting the day, press the smart button 3 to advance the settings to the correct time. D Note If a mistake is made in the date/time settings, use the smart button 4 any time during the procedure to step back to make corrections. 3 Backlight The display of the digital recorder is by default backlit for eight seconds when a button is pressed. [. . . ]