User manual PHILIPS LTC2631

[. . . ] LTC 2600 Series Video Multiplexers Instructions For Use IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. [. . . ] The Alarm/Action condition can now be cleared by pressing the individual camera keys, or all can be cleared simultaneously by pressing the ALM or ACT key again. NOTE: To better understand the parameters that affect how alarms/actions can be handled, refer to Advanced Programming, Section 4. 3. 3 Record After the VCR format has been set up (as described in Section 2. 3), the camera images that are to be recorded can be programmed via the RECORD LIST. Enable this function from the AUTOSET or the VCR Setup menu, and follow the screen prompts. Note that for System4 duplex multiplexer models, two record lists can be programmed, enabling cameras to be recorded to two VCRs. Any camera input can be recorded to a VCR after it has been listed in the multiplexer's RECORD LIST. For Standard models, the RECORD LIST feature is programmed by enabling/disabling individual cameras (up to 9 or 16). For System4 models, the RECORD LIST feature is customizable with up to 32 steps per list (i. e. Press the green ALT key and then press REC. This key combination toggles on or off the record mode. The designated camera video inputs from the record list will be recorded onto the VCR and will be available for playback. 3. 4 Playback Recorded video can be played back on Monitor A in either FULL, QUAD, or MULTI screen modes. Press the green ALT key and then press PLAY. The recorded camera video pictures will be displayed on Monitor A. You can alter the cameras displayed by using the multiscreen display keys as described in Section 3. 2. 18 LTC 2600 Series Section 3 Operation 3. 5 Combined Modes The Duplex multiplexer models also provide combinations of the basic modes of operation as described in this section. Record Plus Multiscreen Display: (See Appendix B, Figure B1) Allows live pictures to be displayed on Monitor A in either FULL, QUAD or MULTI screen mode, FULL screen or sequencing of all cameras can be displayed on Monitor B while recording selected cameras onto the VCR. Simultaneous Record plus Playback: (See Appendix B, Figure B2) Allows recorded camera pictures to be played back and displayed on Monitor A in either FULL, QUAD or MULTI screen mode, live FULL screen display of the selected camera picture or sequencing all cameras on Monitor B, and at the same time, record the selected live camera pictures onto VCR. Two VCRs are required for this operation. Simultaneous Record to Two VCRs: (See Appendix B, Figure B3) System4 duplex models allow: · Display of full screen live video on Monitor A. · Record the selected camera pictures (as defined in the VCR1 RECORD LIST) to VCR 1. · Record the selected camera pictures (as defined in VCR2 RECORD LIST) to VCR 2. Two VCRs are required for this operation--one to record the output from the VCR OUT connector and one to record the output from the MON B connection (Monitor B becomes a VCR output for VCR 2). By using two recorders, customized record lists can be generated for each VCR. For example, while the first VCR is recording normally, the second VCR can be set-up to record only alarm or action video pictures. To program the unit to operate in this mode, press ALT , then 2, and then REC key. This will engage the multiplexer to send video to both vcrs. [. . . ] mm/dd/yy dd/mm/yy yy/mm/dd VCR SETUP: Time Lapse Record List Playback Format Record Format Record Lock VEXT CREATE VCR SETUP: VCR Title VCR/Field Table 3 Hr (PAL) PAL: 3 to 720 hrs. 1, 5, 8, 4, 2, 3, 4 LTC2600 LTC2600, TC8298B, 7-bit, 12-bit LTC2600 LTC2600, TC8298B ON (standard duplex models) OFF, ON OFF (all others) OFF OFF, ON for both VCR OUT and MON B. VCR SETUP 1 3 Hr (PAL) 2 Hr (NTSC) PAL: 3 to 720 hrs. or as programmed. VCR OUTPUT Output Output Relay ALM/ACT Speed Alarm Record Action Record ALARM SETUP: Alarm Dwell Alarm List Alarm Inputs Manual Reset Camera History Beeper ACTION SETUP: Action Dwell Action List Action Zones Walkthrough Manual Reset Camera History Beeper OFF N/C 3 (PAL) 2 (NTSC) INTERLEAVE INTERLEAVE OFF, ACT, ALM, ACT/ALM N/O, N/C 3 to 720 hrs. INTERLEAVE, Exclusive INTERLEAVE, Exclusive 5 sec all off N/O ENABLE OFF DISABLE 3 - 60 sec. [. . . ]